Wood Bathroom Cabinets Maintenance skills
Today, teach you a few times the solid wood bathroom cabinet maintenance skills
1. Pay attention to the cleaning and maintenance of the bathroom cabinet surface. Solid wood bathroom cabinet coated with paint on its film maintenance and maintenance is particularly important, once the film is damaged not only affect the surface appearance, and will further affect the internal structure of the product. So you should always keep the bathroom cabinet clean, every day with a soft cotton cloth gently try to surface dust, from time to time, wring dry moisture of the wet cotton wire will be the hut horns at the cover of the dust thin wipe clean, And then clean the dry soft cotton cloth can be wiped dry, but also in the dry after coated with a thin layer of high-quality light wax, like wiping the same leather gently wipe out the shiny, so not only maintenance of the bathroom cabinet, Also added its light. But the choice of light wax must be careful, must not use the chemical composition of the poor chemical products.
2. Avoid the use of alcohol, gasoline or other chemical dissolved in addition to stains. Bathroom cabinet surface if there is stains, do not be hard to wipe, you can use the warm tea to remove the stains gently, until the water after evaporation in the original part coated with a little light wax, and then lightly ground several times to form a protective film.
3. Avoid scratching of hard objects. Do not let the cleaning tool touch the bathroom cabinet, usually have to pay attention, do not let the hard metal products or other weapons collide bathroom cabinet, to protect the surface does not appear bumps.
4. Avoid damp environments. Summer, such as indoor tide, should use the thin pad to the bathroom cabinet with the ground contact parts separated, while the bathroom cabinet wall parts with the wall to maintain 0.5-1 cm distance gap.
5. Keep away from heat. Installation of the bathroom cabinet is best placed in the distance from the heating stream about 1M place, to avoid a long time higher baking, so that the local wood crack, deformation and deformation of the film local deterioration.
6. Avoid direct sunlight. Should try to avoid the outdoor sun on the bathroom cabinet as a whole or local long exposure, the best place to place in the sun to avoid exposure to the place, or with transparent tulle curtains separated from direct sunlight. This will not affect the indoor lighting, but also make soft for the room to add a few warm and romantic atmosphere, while protecting the indoor bathroom cabinet.
1, solid wood moisture content
Solid wood bathroom cabinet moisture content is not controlled, there will be cracking, deformation and other quality problems. After the production of bathroom cabinet, the moisture content of wood and dry stress determines the shape and material of the bathroom cabinet will not change. So control the solid wood bathroom cabinet moisture content becomes very important, after the balance of moisture content will not be due to sunlight, cold, overheating and other environmental factors cracking deformation.
2, the weather caused
The moisture content of the bathroom cabinet is one to two percentage points lower than the actual air average moisture content. Due to the geographical differences, China's climate weather is not the same, so the bathroom cabinet moisture content requirements are also different. For example, Beijing's average moisture content of 11.4%, so the solid wood bathroom cabinet moisture content should be controlled at 10.4% or 9.4%; South air average moisture content of 14%, then 12% to 13%. Therefore, some of the southern solid wood bathroom cabinet shipped to the north, there will be cracking of the situation.